After Image - Lexmark X850e Service Manual

7500-XXX

After image

Leading edge
Trailing edge
The ghost appears on the media which, may be the image from the previous page or part of the page
currently printing.
Step
1 Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2 Check the toner cartridge.
Install a new toner cartridge.
Re-print the defective image.
Is the image density normal?
3 Check the heat roll and the pressure roll.
Remove the fuser unit assembly.
Caution: Allow the fuser unit assembly to cool down.
Is there contamination or cracks on the heat roll and/or
pressure roll?
4 Check the printer engine card assembly.
Replace the printer engine card assembly.
Perform a print test.
Does the error continue?
2-224
MFP Service Manual
Check Yes
Go to step 2. Problem solved.
Problem solved. Go to step 3.
Replace the Go to step 4.
fuser unit
assembly.
Problem solved. Replace the RIP
card assembly.
Go to
assembly
removal" on
page
No
"RIP card
4-128.