2000-Sheet Dual Input (Ttm)-Tray 4 Media Guide Lock Assembly Removal - Lexmark X850e Service Manual

2000-sheet dual input (TTM)–tray 4 media guide lock assembly removal
1.
Remove the tray 4 assembly. See
page 4-216.
2.
Remove the tray 4 front cover. See
page 4-228.
3.
Remove the tray 4 rear cable assembly. See
removal" on page
4.
Remove the tray 4 front cable assembly. See
removal" on page
5.
Remove the media guide rack and pinion. See
pinion removal" on page
6.
Move both media guides inward.
7.
Lift the front edge of the bottom plate from the tray.
8.
Remove the bottom plate (A) from the tray.
9.
Remove two screws securing the bracket (B) to the tray.
10.
Remove the front media guide (C).
11.
Remove the e-clip securing the tray 4 media guide lock (D) to the front media guide (C).
12.
Remove the tray 4 media guide lock (D).
13.
Remove the spring (E).
14.
Remove the tray 4 media guide lock button (F) from the tray 4 media guide lock (D).
Note: Before re-installing, ensure the tray 4 media guide lock (D) and the tray 4 media guide lock button (F)
are properly installed as shown in the figure.
B
"2000-sheet dual input (TTM)–tray 4 assembly removal" on
"2000-sheet dual input (TTM)–tray 4 front cover removal" on
"2000-sheet dual input (TTM)–tray 4 rear cables
4-230.
"2000-sheet dual input (TTM)–tray 4 front cables
4-233.
4-223.
D
C
A
"2000-sheet dual input (TTM)–media guide rack and
F
E
7500-XXX
4-237
Repair information