Paging, External - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

With External Paging, a user can broadcast announcements over paging equipment

connected to external Paging zones. When a user pages one of these external zones, the

system broadcasts the announcement over the speakers. Like Internal Paging, External

Paging allows a user to locate another employee or make an announcement without calling

each extension individually.

The UNIVERGE SV8100 system allows up to eight External Paging zones, or a common

zone output provided by the CPU (Speaker 9). All other speakers (1~8) require a port on a

PGD(2)-U10 ADP, with a maximum of two external paging circuits per module. You must

have four PGD(2)-U10 ADPs to get the eight external zones. In addition, each external zone

has an associated relay contact. When a user pages to a zone, the corresponding contact

activates (closes). This provides for Paging amplifier control.

Combined Paging

Use Combined Paging when you want to simultaneously Page into an internal and

corresponding external zone. For example, you can Page your company warehouse and

outside loading dock at the same time. Combined Paging is available for zones 1~8 and All

Call. Refer to

Paging, Internal on page 2-1223

addition, you can program a Function Key as a Combined Paging key. Using the External

Page Function Key, when an All Call External Page Function Key is programmed, it includes

both the external zones and the assigned internal zone(s). If the internal page zone is busy

or there are no extensions in a page group, the announcement is made on the external zones

The UNIVERGE SV8100 provides a common zone output provided by the

chassis. For more than one external page zone, External Paging requires

PGD(2)-U10 ADPs and customer-provided paging equipment.

Talkback paging requires the use of a PGD(2)-U10 ADP. The UNIVERGE

SV8100 common zone output provided by the chassis does not allow talkback.

A common zone output is provided by the chassis and is considered Zone 9

when programming.

A Class of Service option is available in system programming to prevent display

telephones from showing incoming paging information. This allows the system

to save processor time and speed up system operation.

Paging, External

for more on setting up Combined Paging. In