NEC Univerge SV8100 Features And Specifications Manual page 1553

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
15-02-19
Multiline Telephone Basic Data
Setup – CTA Data
Communication Mode
15-02-20
Multiline Telephone Basic Data
Setup – Baud Rate for CTA Port
16-02-01
Department Group Assignment
for Extensions – Extension
Group Setting
20-07-18
Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Extension
Data
20-07-19
Class of Service Options
(Administrator Level) – SMDR
Printout Department Group
(STG) Data
20-07-20
Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Account
Code Data
20-13-36
Class of Service Options
(Supplementary Service) – Call
Duration Timer Display
35-01-01
SMDR Options – Output Port
Type
35-01-02
SMDR Options – Output
Destination Number
Station Message Detail Recording
Description/Comments
Select 0 if the dip switch settings
on the CTA Adapter are set to PC
connection (1=on, 2~8=off) or
select 1 if the DIP switches are set
to printer connection (1~2=on,
3~8=off).
Select the baud rate used by the
CTA adapter.
Use to set up the extension group.
Determine if Accumulated
Extension Data is included in the
SMDR report for each COS.
Determine if Department Group
(STG) Data is included in the
SMDR report for each COS.
Determine if Accumulated Account
Code Data is included in the
SMDR report for each COS.
Turn Off or On a Call Timer for the
extension.
Specify the type of connection
used for SMDR. The baud rate for
the COM port should be set in
Program 15-02-19.
Specify the SMDR printer output
extension (CTA extension
number).
Assigned Data
1
0 = CTI Mode
1 = Non Procedural
Mode (Non-SCS)
(default = 0)
0 = 4800
1 = 9600
2 = 19200
(default = 2)
1-64
(default = 1)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 1 for COS
01~15)
0 = None
3 = LAN
4 = CTA/CTU
(default = 0)
Up to eight digits
(default not assigned)
Issue 13.0
Level
2
3
2 - 1519

Advertisement

Table of Contents
loading

Table of Contents