NEC Univerge SV8100 Features And Specifications Manual page 1271

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Press the Personal Park key (Program 15-07 or SC 752:

Press the StaP Soft Key h.

Dial the Personal Park single digit code (Program 11-16-11).

The Intercom call to the co-worker is dropped. A confirmation tone is heard and the call is parked at the

co-worker's extension.

If the co-worker does not answer the call, it will recall to the originator's extension.

To pick up a call parked at your extension:

Press the Personal Park key (Program 15-07 or SC 752:

Press Speaker and dial 757.

At a single line telephone, do not press Speaker.

The Personal Park single-digit service code (Program 11-16-11) cannot be used in this operation.

To answer a call parked at a co-worker's extension:

Press Speaker, dial

At a single line telephone, do not press Speaker.

To display Caller ID for a call in Park:

With Program 15-02-08 set to 0 (preselect) for this feature.

With Program 15-02-08 set to 0 (preselect) and a call in Park, press the Park key. (Program 15-07

With Program 15-02-08 set to 1 (One-Touch), and a call in Park, press Feature, then the Park key

(Program 15-07 or SC 752:

Call Park – Step Call:

To Park a call in the first available system orbit:

You can Park Intercom or trunk calls.

Press Hold or Transfer.

If you hear a busy tone, the orbit is busy. Proceed to step 3.

Program 20-11-27 must be enabled in the multiline terminals Class of Service.

plus the co-worker's extension number.