NEC Univerge SV8100 Features And Specifications Manual page 1227

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
11-11-17
Service Code Setup (for Setup/
Entry Operation) –
Programmable Function Key
Programming (2-Digit Service
Codes)
20-13-18 Class of Service Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
30-03-01 DSS Console Key Assignment
One-Touch Calling
Description/Comments
Define a Programmable Function
Key for One-Touch Calling by
defining the key as a DSS/
One-Touch key (01).
Set the service code (default 751)
to assign 2-digit function codes to
the Function keys.
Turn Off or On an extension user
ability to program General function
keys using Service Code 751 (by
default). (Refer to Program
20-07-10 for Service Code 752.)
Customize DSS Console keys to
function as DSS keys, Service
Code keys, Programmable
Function Keys, and One-Touch
Calling keys.
When programming a feature
within a One-Touch Key, refer to
the feature description for
additional programming options.
Assigned Data
1
For Line Keys: 1~48
0~99 (Normal Function
Code)
(default = Service

Code 751)*
 
00 ~ 99
(Appearance Function
Code) (default =
Service Code 752)
MLT
(default = 751)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Key Number
001~500
0~99 (General
Functional Level)
97 = Door Box Access
key (additional data:
1~8 Door Box No.)
00 ~ 99
 
(Appearance
Functional Level)
Issue 13.0
Level
2 3



2 - 1193