Ip Video Doorphone; Table 2-56 Dr-Viewer Requirements - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
With Version 9000 or higher software, the IP Video Doorphone (IP3NE-IPCDH) can be connected to
the system.
Description
With Version 9000 or higher software, the IP Video Doorphone (IP3NE-IPCDH) can be connected to
SV8100 system through a PoE Data Switch and is normally used to monitor an entrance door. When
pressed, the Doorphone sends a chime tone to all extensions programmed to receive the chime. To
answer, the called extension user just lifts the handset. This lets the extension user talk to the visitor at
the Doorphone location. In addition, a user can view the outside image using the DR-viewer application
(installed on a PC in the same network) or the image can be viewed using a Polycom IP VVX 1500
terminal.
Each Doorphone has a Normally Opened and a Normal Closed relay contact that can be used to
connect to the electric door strike. These contacts are used to remotely control the entrance door. After
answering the chimes, a Multiline Terminal user can press the Recall key and activate the Doorphone
contacts. This in turn releases the electric strike on the entrance door.
The following table lists the minimum requirement necessary when installing the DR-Viewer on a PC.
CPU Recommended
Memory
Disk Space

IP Video Doorphone

Table 2-56 DR-Viewer Requirements

OS
Minimum
Single Core
Dual Core
Minimum
Recommended
IP Video Doorphone
Windows XP
(Professional SP3)
2.0 GHz 32bits CPU or more
3.0 GHz 32bits CPU or more
1.6 GHz 32bits CPU or more
512MB (Minimum)
1GB (Minimum)
200MB (Minimum)
Additional disk space is required for OS to function.

When the log storage term is for one month.

Issue 13.0
Windows 7
(Professional)
(Professional SP1)
3.2 GHz 32bits CPU or more
2.0 GHz 32bits CPU or more
1GB (Minimum)
2GB (Minimum)
2 - 921