Softkeys - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Each display telephone provides interactive softkeys for intuitive feature access. It is not necessary to

remember feature codes to access the telephone advanced features because the function of the

softkeys change as the user processes calls.

Additional options allow you to fine tune the multiline terminal volume levels for handset receive and

transmit, speaker volume, ringer and handset volume, and headset volume levels. You can also

customize the point at which the built-in speakerphone switches from transmit to receive; a boon for

noisy environments. The display telephones also have a contrast control for the LCD display.

If a feature is restricted by an extension Class of Service, though the Softkey menu still

displays the option, the user cannot set the feature.

Using the Directory Dialing Softkeys, Recall can toggle the language display from English

to Japanese.

The feature must be active to change the volume (e.g., telephone must be ringing, page

being heard, etc.). Press the volume keys when the telephone is idle to adjust the display

Disabling the softkeys or limiting the menu key is supported with Version 8000 or higher

system software.

When a Softkey is disabled, the Softkey is not displayed on the LCD (depending on the

feature it may appear) and related keys are not functional. Cursor keys and the Menu key

are also disabled.

To use the Disable Softkey function, Program 15-02-71 must be set to 1 (On) at associated terminal.

Default Setting

Display shows time/date/extension/Softkey menu information.

Softkeys