Ip Multiline Station (Sip) - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
The same user name and password can be assigned to IP Multiline Station, MH240 and Desktop
ports when automatic or manual registration is used (Version 3000 or higher software).
With Version 3000 or higher system software, the Registration Override feature is enhanced to allow
IP Multiline Stations (SIP) using 1st Party CTI application or Multiline Stations (SIP) in a system using
3rd Party CTI applications (Desktop Shared Services or UCB) to be overridden giving users access to
their IP telephone from any location. By utilizing the override login function, users have the flexibility of
logging into their IP Station in the office as well as remotely at the home office.
NAPT (Network Address Port Translation) - With Version 3000 ~ Version 5000 system software,
DT700 series terminals can be installed at remote locations, however Plug and Play is not supported.
Some configuration in the remote router is required, and terminal firmware must be upgraded to
Version 3.0.0.0 or higher.
Continue below for additional NAPT enhancements.

When upgrading to Version 3100 ~ Version 8000 (8.0) software, four IP Terminal Basic licenses are
provided. If a system with Version 3000 (3.01 or lower) is upgraded to Version 3100 ~ Version
8000 (8.0) software, the system gains four IP Terminal licenses as soon as it is upgraded.
With Version 5.0.0.0 firmware, the following features are supported.
Link Layer Discovery Protocol (LLDP): Standard used to transmit and receive information about

neighboring network devices using Layer 2 Multicast frames.
XML Multi-Window Support – the multi-window service adds the following:

Multiple XML applications can be displayed and accessed through the NEC terminal XML menu.

Line key operation can be performed without closing the active XML application window.

Refer to the DT700 Resource manual for detailed information.
For troubleshooting purposes, a managed switch capable of port mirroring is required to capture
packet data from the SV8100 IPLB Ethernet port.
With Version 6000 or higher the NAPT feature is enhanced. The remote side router may not require
having port forwarding set up. However, due to the fact that many manufacturers are producing
routers, port forwarding may still be needed. The Version 3000 Enhancement license is required for
this feature and Program 15-05-45 must be enabled on a per station basis. This feature requires
installation of a PZ-( )IPLB.
When installing the DT730G terminals (ITL-12CG-3 and ITL-12DG-3), Version 7000 or higher
software is required.

IP Multiline Station (SIP)

IP Multiline Station (SIP)
Issue 13.0
2 - 773