NEC Univerge SV8100 Features And Specifications Manual page 1704

Issue 13.0
Program
Program Name
Number
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
22-08-01 DIL/IRG No Answer Destination
24-02-01 System Options for Transfer –
Busy Transfer
2 - 1670
Description/Comments
The system waits for this time to
expire before placing the call in a
talk state (Call Timer starts after
time expires, Voice Over and
Barge-In are not allowed until after
time expires).
Assign extensions to ring groups.
Define a trunk ring group. When
transferring a DID or trunk call to
the trunk defined ring group, the
trunk then rings the defined
extensions for the ring group.
Assign the DIL No Answer Ring
Group where an unanswered call
should overflow.
Enable/Disable an extension user
ability to Transfer calls to busy
extensions. If disabled, calls
transferred to busy extensions
recall immediately.
UNIVERGE SV8100
Assigned Data
1
0~64800 (seconds)
(default = 5)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
0 = Disable (No)
1 = Enable (Yes)
(default = 1)
Level
2 3





Transfer