NEC Univerge SV8100 Features And Specifications Manual page 759

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-30
Service Code Setup (for Service
Access) – Specified Trunk
Answer
11-12-33
Service Code Setup (for Service
Access) – Group Hold
11-12-34
Service Code Setup (for Service
Access) – Answer for Group
Hold
14-01-16
Basic Trunk Data Setup – Forced
Release of Held Call
Hold
Description/Comments
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
Enable/Disable Forced Release of
Held Call.
Assigned Data
1
MLT, SLT
(default = 672)
MLT, SLT
(default = 732)
MLT, SLT
(default = 762)
0 = Disable
1 = Enable
(default = 0)
Issue 13.0
Level
2
3
2 - 725

Advertisement

Table of Contents
loading

Table of Contents