NEC Univerge SV8100 Features And Specifications Manual page 755

UNIVERGE SV8100
Program
Program Name
Number
15-02-41 Multiline Telephone Basic Data
Setup – Incoming Ring Setup
15-02-42 Multiline Telephone Basic Data
Setup – Incoming Off-Hook Ring
Setup
15-02-43 Multiline Telephone Basic Data
Setup – Headset Ring Duration
15-07-01 Programmable Function Keys
20-02-05 System Options for Multiline
Telephones – Headset Busy
Mode
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-09-07
Class of Service Options
(Incoming Call Service) – Call
Queuing
Headset Operation
Description/Comments
Determine if incoming calls ring
the speaker or headset.
Determine if incoming off-hook
ringing rings the speaker or the
headset.
If incoming ringing is set for
headset, set the duration the call
rings the headset before ringing
the speaker.
Assign a function key for Headset
Operation (code 05).
Set the conditions under which a
headset extension is busy to
incoming callers:
The Headset extension is busy

to incoming callers when only
one extension appearance is
busy (0).
- OR -
Headset extension is busy to

incoming callers only when
both extension appearances
are busy (1).
Determine whether intercom calls
should ring or voice-announce
extensions.
Turn Off or On an extension ability
to have calls queued if a call rings
the extension when it is busy.
Assigned Data
1
0 = Speaker Normal
Ring
1 = Headset Ring
(default = 0)
0 = Speaker Off-Hook
Ring
1 = Headset Off-Hook
Ring
(default = 0)
0 = No Switch to
Speaker Ring
1 = 10 seconds
2 = 20 seconds
3 = 30 seconds
4 = 40 seconds
5 = 50 seconds
6 = 1 minute
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = No
1 = Yes
(default = 0)
0 = Disable (Voice)
1 = Enable (Signal)
(default = 0)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 13.0
Level
2 3






2 - 721