NEC Univerge SV8100 Features And Specifications Manual page 1554

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 13.0
Program
Program Name
Number
35-01-03
SMDR Options – Header
Language
35-01-04
SMDR Options – Omit Digits
35-01-05
SMDR Options – Minimum Digits
35-01-06
SMDR Options – Minimum Call
Duration
35-01-07
SMDR Options – Minimum Ring
Time (For Incoming Calls)
35-01-08
SMDR Options – Format
Selection
35-02-01
SMDR Output Options – Toll
Restricted Call
35-02-02
SMDR Output Options – PBX
Calls
2 - 1520
Description/Comments
Specify the language in which the
SMDR header should be printed.
The number of digits entered in
this option do not print on the
SMDR report. Enter 0 if you want
to print all digits.
Outgoing calls must have at least
this number of digits for inclusion
in the SMDR report. Enter 0 to
include all outgoing calls,
regardless of the number of digits
dialed.
The duration of a call must be at
least this time to be included on
the SMDR report. Enter 0 to have
calls of any duration print.
A call must ring for at least this
time to be included on the SMDR
report. Enter 0 to allow all calls to
print.
Do not change:
This option is added to allow an
increased account code field from
eight to 16 when used in the U.K.
This allows 16 characters of the
Caller ID name to be displayed.
For the U.S., this option is set to 0
and should remain at this setting
as 16 characters are already
provided for the account code
field.
SMDR can include or exclude calls
blocked by Toll Restriction.
When the system is behind a PBX,
SMDR can include all calls (1) or
just calls dialed using the PBX
trunk access code (0).
UNIVERGE SV8100
Assigned Data
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
(default = 0)
0~24
(0 = None omitted)
(default = 0)
0~24
(0 = Include all)
(default = 0)
0~65535 (seconds)
(0 = All)
(default = 0)
0~65535 (seconds)
(0 = All)
(default = 0)
0 = NA Type (North
America)
1 = G/J Type
(Overseas/ Japan)
(default = 0)
0 = Not Displayed
1 = Displayed
(default = 1)
0 = Not Displayed
1 = Displayed
(default = 1)
Station Message Detail Recording
Level
1
2
3

Advertisement

Table of Contents
loading

Table of Contents