NEC Univerge SV8100 Features And Specifications Manual page 923

UNIVERGE SV8100
Program
Program Name
Number
84-14-13 SIP Trunk Basic Information
Setup – Incoming/ Outgoing SIP
Trunk for E.164
SIP Trunk E.164 CLIP Enhancement
Program
Program Name
Number
10-02-01 Location Setup – Country Code
10-02-02 Location Setup – International
Access Codes
10-02-03 Location Setup – Other Area
Access Code
84-14-13 SIP Trunk Basic Information
Setup – Incoming/ Outgoing SIP
Trunk for E.164
IP Trunk – (SIP) Session Initiation Protocol
Description/Comments
When this data is set to 1, then for
any outbound SIP calls a + is
added as a prefix to the Request-
URI, To and From header fields of
the SIP message.
When it is set to 2 then if the
dialed international access code
matches the value in Program
10-02-02 this value is removed
from the number dialed and the +
added as a prefix to the Request-
URI, To and From header fields of
the SIP Message.
Description/Comments
Enter the country code.
Enter the international access
code.
Enter the other area access code.
When this data is set to 1, then for
any outbound SIP calls a + is
added as a prefix to the Request-
URI, To and From header fields of
the SIP message.
When it is set to 2 then if the
dialed international access code
matches the value in Program
10-02-02 this value is removed
from the number dialed and the +
added as a prefix to the Request-
URI, To and From header fields of
the SIP Message.
Assigned Data
1
0 = Off
1 = Mode 1
2 = Mode 2
3 = Mode 3
(default = 0)

Assigned Data
1
Dial (up to four digits):

#
0~9, ,
(default = 1)
Dial (up to four digits):

#
0~9, ,
(default not assigned)
Dial (up to two digits):

#
0~9, ,
(default = 9)
0 = Off
1 = Mode 1
2 = Mode 2
3 = Mode 3
(default = 0)

Issue 13.0
Level
2 3
Level
2 3
2 - 889