NEC Univerge SV8100 Features And Specifications Manual page 803

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
82-01-03
Incoming Ring Tone –
Modulation
Handsfree Answerback/Forced Intercom Ringing:
Program
Program Name
Number
20-02-12
System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-06-01
Class of Service for Extensions
20-08-10
Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-09-05
Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-13-06
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
80-01-01
Service Tone Setup – Tone 28
(28)
(Speaker Monitor Tone)
Intercom
Description/Comments
Customize the Intercom Ring Tone
modulation if desired.
Description/Comments
Enable/Disable Forced Intercom
Ringing. If enabled, Intercom calls
normally ring. If disabled,
intercom calls voice announce.
For all NEC Cordless telephones,
this option must be enabled since
voice announce is not possible.
Assign Class of Service (1~15) for
extensions.
Turn Off or On an extension ability
to force Handsfree Answerback or
Forced Intercom Ringing for
outgoing Intercom calls.
Turn Off or On an extension user
ability to enable Handsfree
Answerback or Forced Intercom
Ringing for their incoming
Intercom calls.
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook Signals.
This tone changes the tone the
originator of an ICM call hears.
(The tone cannot be changed for
what is heard by the user when
receiving an ICM call.)
Assigned Data
1
0 = No Modulation
1 = 8Hz Modulation
2 = 16Hz Modulation
3 = Envelope
(default = 2)
Assigned Data
1
0 = Disable (Voice)
1 = Enable (Signal)
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Refer to
Table 2-33
Service Tone Setup
Defaults, Program
80-01-01 on page
2-705
(Service Tone
#28).
Issue 13.0
Level
2
3
Level
2
3
2 - 769

Advertisement

Table of Contents
loading

Table of Contents