NEC Univerge SV8100 Features And Specifications Manual page 822

Issue 13.0
Program
Program Name
Number
10-46-01 DT700 Server Information Setup
– Register Mode
15-05-15 IP Telephone Terminal Basic
Data Setup – CODEC Type
15-05-26 IP Telephone Terminal Basic
Data Setup – DT700 Terminal
Type
15-05-39 IP Telephone Terminal Basic
Data Setup – CTI Override Mode
2 - 788
Description/Comments
Normal mode:
When the phone boots up, it
reports the ext. assigned in the
phone or chooses the next
available extension in the system.
No password is required.
Auto mode:
If set to Auto, the SIP user name
and password must be entered in
the actual IP phone. These
settings must match 84-22/
15-05-27, for the phone to come
on-line.
Manual mode:
When the phone boots up it
prompts a user to enter a user ID
and password before logging in. It
checks the user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not
come on-line.
Set the registered IP Phone
Codec type – Reference Program
84-24 DT700 Codec Basic
Information.
Set the DT700 series terminal
type.
Enable/Disable the ability of a
station to be overridden when CTI
is active.
UNIVERGE SV8100
Assigned Data
1
0 = Normal
1 = Auto
2 = Manual
(default = 0)
1-Type 1
2-Type 2
3-Type 3

4-Type 4
5-Type 5
(default = 1)
0 = Not Set
1 = ITL-( )E-1D/IP-( )E-
1
2 = ITL-( )D-1D/ITL-
12BT-1D/ITL- 12PA-1D
[without 8LKI(LCD)-L]
3 = ITL-( )D-1D/ITL-
12BT-1D/ITL-12PA-1D
[with 8LKI(LCD)-L]
4 = ITL-320C-1
5 = Softphone
6 = CTI
7 = AGW
10 = ITL-12DG-3
11 = ITL-12CG-3
12 = ITL-0-1
(default = 0)
0 = Disable
1 = Enable
(default = 0)
IP Multiline Station (SIP)
Level
2 3


