NEC Univerge SV8100 Features And Specifications Manual page 991

UNIVERGE SV8100
In 15-07-01, do not assign
function keys as line keys.
In 15-07-01, do not
assign Trunk Group
Access or trunk group keys.
Adjust the CODEC Gain
in 14-01-02 (transmit)
and 14-01-03 (receive).
In 21-15-01, enter the
extension number and
enter the Trunk Group
Routing route number.
ISDN Compatibility
Is the amount of time the system waits before
placing the call in a talk state sufficient?
Should extension users
No have one-button placing
Should extension users have
No one-button access to trunk
groups for placing calls?
Trunks
Check the Analog Trunk Timers in 81-01
for compatibility with the telco.
If desired, assign names to
Stop No
In 11-09-02, assign the
Service Code set up in the
previous step for Alternate
Yes
Refer to the Trunk
Group Routing
feature and set up
Trunk Group
Routing.
B
Yes
Yes
of outside calls?
Yes
See "CAP Key" in the
Feature & Specification
manual for more details.
Do you want to adjust
the gain (volume) for
trunks?
No
trunks in 14-01-01.
Do you want to set up
an Alternate Trunk Yes
Route Access Code?
Trunk Route Access.
Should extension be
able to use Alternate No
Trunk Route Access?
Is Trunk Group
Routing defined?
Stop
In 21-01-03, enter
No the interval for the
trunk interdigit timer.
In 15-07-01, assign
function keys as line
keys (code *01+001- 200).
In 15-07-01, assign CAP Keys
(*08) or line group keys (*02).
For example, to make
50 the Alternate Trunk
Route Access Code:
DIAL = 5
Digit = 2
Kind = 8
In 11-01-01, set up a
Service Code for
Alternate Trunk Route
Access.
In 21-15-01, enter the
extension number
and enter 0 to
prevent routing.
Issue 13.0
2 - 957