Sv8100/Sv8300 Terminals; Table 2-105 Dt700 Supported Encryption - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

With Version 3000 or higher system software, the appropriate line key page automatically displays

for incoming calls on the DTL-8LD-1 (DESI-Less) and ITL-320C-1 terminals.

When installing the DT730G terminals (ITL-12CG-3 and ITL-12DG-3), Version 7000 or higher

software is required.

The SV8100/SV8300 is a full-featured IP based communications system providing a rich feature set with

pure Voice over IP (VoIP) communications, across corporate Local and Wide Area Networks (LAN and

The DT700 series telephones provide a converged infrastructure at the desktop, with a 10Base-T/

100Base-TX connection to the LAN and built-in hub for a PC connection to the telephone itself. The

system can provide peer to peer connections between the DT700 series telephones with voice

compression, offering existing IP telephone features with an enhanced user interface. On the WAN side,

the system can provide peer to peer connections over IP networks with the voice compression, on CCIS

over IP or Remote Unit over IP.

Remote Unit over IP is available only for the SV8300.

The SV8100/SV8300 can provide legacy line/trunk interfaces to support the existing Time Division

Multiplexing (TDM) based infrastructure, such as analog telephones, digital telephones (DT300 series),

analog networks and digital networks (T1/E1, ISDN, etc.).

This feature is supported with main software V 2.5 or above and terminal firmware 92.2.1.0 or above.

STD SIP (Non P2P)

SV8100/SV8300 Terminals

STD SIP (P2P)

SV8100/SV8300 Terminals

DT700 VoIPDB

Encrypt between DT700 and VoIPDB

DT700 VoIPDB

Encrypt between DT700 and VoIPDB