NEC Univerge SV8100 Features And Specifications Manual page 1707

UNIVERGE SV8100
Operation
Transferring Trunk Calls:
To Transfer a trunk call to a co-worker's extension:
1. At the multiline terminal, press Transfer.
- OR -
At 500/2500 single line telephone, hookflash.
You hear Transfer dial tone.

2. Dial the co-worker's extension number.
If the extension is busy or does not answer, you can dial another extension number or press the line key to return

to the call. In addition, you may be able to hang up and have the call Camp-On.
Single line telephone users can press hookflash to retrieve the call. If a call was transferred and the 500/2500

user has hung up the handset, the call can be retrieved by dialing
been transferred.
3. Announce the call and press Transfer (Program 15-07 or SC 751: 06) or hang up.
If you do not have Automatic On-Hook Transfer, you must press Conf (Program 15-02-24=1) or your Transfer

Programmable Function Key to Transfer the call.
If your co-worker does not want the call, press the flashing line key to return to the call.

Single line telephone users can press hookflash to retrieve the call. If a call was transferred and the 500/2500

user has hung up the handset, the call be can retrieved by dialing
been transferred.
If you do not want to screen the call, hang up without making an announcement.

To answer a call transferred to your extension:
1. Lift the handset or press Speaker when a co-worker announces the call.
Transferring without Holding:
To Transfer without holding (multiline terminal only):
1. Lift the handset.
2. Press busy line or press Speaker.
3. When original caller hangs up, you are connected.
Transfer
and the extension number to which it had

and the extension number to which it had

Issue 13.0
2 - 1673