NEC Univerge SV8100 Features And Specifications Manual page 1319

UNIVERGE SV8100
Program
Program Name
Number
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
20-13-18 Class of Service for Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
20-13-49 Class of Service for Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Operation
To change a 2-digit programmable key:
1. Press Speaker.
2. Dial 751 for 2-digit codes.
3. Press the key you want to program.
4. Enter the 2-digit key function, any additional information needed for the key and press Hold.
For available functions codes refer to Program 15-07 in the UNIVERGE SV8100 Programing Manual.

To undefine a key, enter 00.

To change a 3-digit programmable key:
1. Press Speaker.
2. Dial 752 for 3-digit codes.
3. Press the key you want to program.
Programmable Function Keys
Description/Comments
Turn Off or On an extension user
ability to program the Appearance
function keys using Service Code
752.
When programming a feature

as a Programmable Function
Key, refer to Program
15-07-01 in the UNIVERGE
SV8100 Programming
Manual.
Turn Off or On an extension user
ability to program General function
keys using Service Code 751 (by
default). (Refer to Program
20-07-10 for Service Code 752.)
Turn Off or On the BLF Indication
on CO Incoming State.
Assigned Data
1
0 = Off
1 = On
(default = 1 for COS
01~15)

0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 13.0
Level
2 3

2 - 1285