UNIVERGE SV8100
NetLink Multi-SIP Carrier
Description
The Version 5000 enhancement enables multiple SIP Trunk carriers to be utilized when NetLink is
configured.
The operation of SIP Trunk is described as follows when an existing Version 4000 (V4.01 or lower)
NetLink system is configured (refer to
the secondary system calls for using a SIP Trunk a total of three DSPs are required. One DSP from the
secondary and two DSPs from the Primary system. Also, only 32 Register ID's are available which are
programmed in the Primary system.
When the Secondary NetLink system calls out using its own SIP Trunk, no DSPs are used from the
Primary system.
The NetLink Nodes which have their own SIP trunks can use Register IDs independently of each
other.
SV8100 NetLink
Figure 2-78Example – Version 4000 or Earlier on page
Figure 2-78 Example – Version 4000 or Earlier
Issue 13.0
2-1547). If
2 - 1547