NEC Univerge SV8100 Features And Specifications Manual page 824

Issue 13.0
Program
Program Name
Number
84-22-05 DT700 Multiline Logon
Information Setup – Nick Name
84-24-28 DT700 Multiline CODEC Basic
Information Setup – Audio
Capability Priority
84-26-01 IPL Basic Setup – IP Address
84-26-02 IPL Basic Setup – RTP Port
Number
IP Multiline Station (SIP) with NAPT:
Program
Program Name
Number
10-12-01 CD-CP00-US Network Setup – IP
Address
10-12-03 CD-CP00-US Network Setup –
Default Gateway
2 - 790
Description/Comments
Input the Personal ID from
terminal automatically when log on
again.
Assign the CODEC for the NEC
DT700 IP Phone
Assign the IP address for each
DSP on the IPLA/IPLB.
Assign the RTP port number to be
used for each DSP on the IPLA/
IPLB.
Only even numbered ports

are supported.
Description/Comments
Assign the IP Address for the CPU
NIC card.
When an IPLA/IPLB card is
installed in the system, it is
recommended to set this Program
to 0.0.0.0.
Assign the default gateway IP
address for the CD-CP00-US.
UNIVERGE SV8100
Assigned Data
1
Up to 32 characters
(default not assigned)
0 = G.711
1 = G.729
2 = G.722
(default = 0)
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:

Slot 4 = 172.16.0.44
VoIP GW 1~8:
172.16.0.20~
172.16.0.27
0~65534
Defaults:
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084

VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
Assigned Data
1
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 172.16.0.10)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.254.255.254
192.0.0. 1~
223.255.255.254
(default = 0.0.0.0)
IP Multiline Station (SIP)
Level
2 3


Level
2 3