NEC Univerge SV8100 Features And Specifications Manual page 1677

UNIVERGE SV8100
Trunk Disconnect Continue/Disconnect Codes:
Program
Program Name
Number
14-01-25 Basic Trunk Data Setup –
Continued/Discontinued
Trunk-to-Trunk Conversation
20-28-01 Trunk to Trunk Conversation –
Conversation Continue Code
20-28-02 Trunk to Trunk Conversation –
Conversation Disconnect Code
20-28-03 Trunk to Trunk Conversation –
Conversation Continue Time
24-02-07 System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
24-02-10 System Options for Transfer –
Disconnect Trunk-to-Trunk
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
Tandem Trunking (Unsupervised Conference)
Description/Comments
Enable/Disable the ability to dial a
service code to continue or
disconnect the trunk-to-trunk
conversation after the alert tone is
heard.
Input the code that can be dialed
to continue the conversation after
the Trunk-to-Trunk Release
Warning tone is heard.
Input the code that can be dialed
to disconnect the conversation
after the Trunk-to-Trunk Release
Warning tone is heard.
Input the time the conversation
extends when the Conversation
Continue Code is dialed.
This timer starts when a trunk
begins talking with another trunk
(for example: Trunk-to-Trunk
Transfer/Tandem Trunking).
When this time expires, a warning
tone is heard. If Program
24-02-10 is set, the conversation
disconnects after time expires.
This time is set again when the
external digit timer expires. One of
the trunks used must be an analog
trunk (or leased line).
Determine the time a conversation
continues after the timer in
Program 24-02-07 expires. If this
option is set to 0, the conversation
is disconnected immediately. This
program has no affect if Program
24-02-07 is set to 0. One of the
trunks used must be an analog
trunk (or leased line).
Determine the time a DISA caller
or any trunk-to-trunk (such as
Tandem Trunking) conversation
can talk before the Long
Conversation tone is heard.
Assigned Data
1
0 = Disable
1 = Enable

(default = 0)
#
0~9, ,

(default not assigned)
#
0~9, ,

(default not assigned)
0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 1800)

0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 3600)
Issue 13.0
Level
2 3





2 - 1643