NEC Univerge SV8100 Features And Specifications Manual page 1034

Hide thumbs Also See for Univerge SV8100:

Table of Contents

The called extension has ability to receive Callback settings from multiple extensions. If

this occurs the Callback requests are returned in the order received.

The CCIS Callback feature does not apply to trunk calls as it does not include trunk queuing

Verified Account Codes for Toll Calls across a CCIS network are not restricted when a trunk

access code is added to the number allowing ARS routing through another K-CCIS T1/IP

networked site. This access code (typically a 9), precedes the dialed "1" used by the

system to identify a long distance call. As a result, the call is no longer considered long

distance and the account code is not required.

Any calls across CCISoIP (station to station or stations transferring trunks) that use Quick

Transfer to voice mail require an extra CAP key. The initial call across the CCSIoIP link

uses the first CAP key. When the digit "8" is pressed to perform the Quick Transfer, a

second CAP key is accessed.

When trunks are being shared for outbound calls between CCIS networks, all sites must

utilize the same trunk access code.

Default Setting

System Availability

All Terminals

Required Component(s)

The following table shows the chassis system software compatibility with CD-CCTA

firmware and K-CCIS feature compatibility.

Chassis Software

X = Compatible

– = Not Compatible

UNIVERGE SV8100