NEC Univerge SV8100 Features And Specifications Manual page 843

UNIVERGE SV8100
Program
Program Name
Number
15-07-01 Programmable Function Keys
15-02-13 Multiline Telephone Basic Data
Setup – Redial List Mode
15-02-34 Multiline Telephone Basic Data
Setup – Call Register Mode
15-05-28 IP Telephone Terminal Basic
Data Setup – Addition
Information Setup
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-06-01 Class of Service for Extensions
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
IP Multiline Station (SIP) – ML440 Cordless
Description/Comments
Assign functions to multiline
terminal line keys.
NEC recommends the following
for the first three programmable
keys:
Line Keys 1 and 2 = CAP Keys
Line Key 3 = Intercom Key
Select the type of numbers that
are stored in the Redial List –
Internal and External numbers (0)
or External only (1).
For the ML440 extensions

this should be set to 0.
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
 For the ML440 extensions
this should be set to 1.
Determines manner in which CID
id presented to an extension.
 For the ML440 extensions
this should be set to 1.
Enable/Disable Forced Intercom
Ringing. If enabled, incoming
Intercom calls normally ring. If
disabled, Intercom calls
voice-announce.
Assign ML440 handsets to their
own Class of Service.
Set this option for the ML440
Class of Service. When an
extension is set to ring mode for
ICM calls, enabling this option
prevents callers from changing the
call to voice announce mode.
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
*00 ~ 99*
(Appearance Function

Code) (Service Code
752 by default)
(*08 + XXXX = CAP
key where XXXX is the
CAP orbit number
0001-9999)
0 = ICM/Trunk
(Extension/Trunk
Mode)

1 = Trunk Mode
(default = 1)
0 = Trunk Mode
1 = Extension/Trunk

Mode
(default = 0)
0 = Do not inform
1 = Inform

(default = 0)
0 = Disable (Voice)
1 = Enable (Signal)

(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for

COS 1~15)
Issue 13.0
Level
2 3
2 - 809