NEC Univerge SV8100 Features And Specifications Manual page 1136

Issue 13.0
Program
Program Name
Number
84-10-01 ToS Setup – ToS Mode
84-10-07 ToS Setup – Priority (D.S.C.P. -
Differentiated Services Code
Point)
84-11-28 Dterm IP CODEC Information
Basic Setup – Audio Capability
Priority
84-22-01 DT700 Multiline Logon
Information Setup – User ID
84-22-02 DT700 Multiline Logon
Information Setup – Password
84-22-03 DT700 Multiline Logon
Information Setup – User ID
Omission
2 - 1102
Description/Comments
When Input Data is set to 1,
Protocol 7 is invalid. When Data is
set to 2, Protocols 2~6 are invalid.
DSCP (Differentiated Services
Code Point).
Set voice (RTP packet) encoding
parameters.
Input the User ID for each
Personal ID Index (1-512) when
using auto or manual registration
in 10-46-01.
 IP multiline terminals only
support numerical user IDs,
not alphanumeric.
Input the Password for each
Personal ID Index (1-512) when
using manual or auto registration
in 10-46-01.
Enable/Disable User ID Omission.
 Used when the registration
mode (10-46-01) is set to
manual. When the phone
prompts for a login, the
previous user ID appears so
the user only has to enter the
password.
UNIVERGE SV8100
Assigned Data
1
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
(default = 0)
0~63

(default = 0)
0 = G.711_PT

2 = G.729_PT
(default = 0)
Up to 32 characters
(default not assigned)
Up to 16 characters
(default not assigned)
0 = Off
1 = On
(default = 0)
MH240 Wireless IP Telephone
Level
2 3



