NEC Univerge SV8100 Features And Specifications Manual page 1016

Issue 13.0
Program
Program Name
Number
50-15-04 CCIS over IP Basic Information
Setting – Connection Method for
Terminal
84-21-21 CCIS over IP CODEC Information
Basic Setup – DTMF Relay Mode
K-CCISoIP FAX:
Program
Program Name
Number
15-03-03 Single Line Telephone Basic Data
Setup – Terminal Type
84-21-47 CCIS over IP CODEC Information
Basic Setup – FAX over IP Type
84-32-01 FAX over IP Codec Setup – FAX
Codec
84-32-02 FAX over IP Codec Setup –
Payload Size
84-32-03 FAX over IP Codec Setup – Jitter
Buffer Mode
84-32-04 FAX over IP Codec Setup –
Minimum Jitter Buffer
2 - 982
Description/Comments
Choose the connection method for
the DT700.
When connecting to a SV8300 or
SV8500 this must be set to 2
(H.245).
Description/Comments
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Select FAX over IP type.
Type1: SV8100 original mode
Type2: PBX compatible mode
If type2 is selected, FAX over IP
feature is executed using Program
84-32 settings.
Setup FAX over IP codec settings
when using CCIS over IP.
If "4 = T.38 (UDPTL)" is selected,
system does not follow item 02 to
07.
Setup FAX over IP Codec settings
when using CCIS over IP.
Setup FAX over IP Codec settings
when using CCIS over IP.
Setup FAX over IP Codec settings
when using CCIS over IP.
UNIVERGE SV8100
Assigned Data
1
0 = Peer to Peer
disable
1 = Peer to Peer
enable
(default = 1)
0 = Disable (IPL)
2 = Inbound(RFC2833
3 = Outbound(H.245)
(default = 0)
Assigned Data
1
0 = Normal
1 = Special
(default = 0)

0 = Type 1
1 = Type 2
(default = 0)
1 = G.711 a-law
2 = G.711 u-law
3 = G726
4 = T.38 (UDPTL)
(default = 2 for US)
(default = 1 for other)
1-4 (10ms base)
(default = 2)
0 = Static
1 = Self Adjusting
(default = 1)
0~300
(default = 20)
K-CCIS – IP
Level
2 3


Level
2 3




