Inucb Blade - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

The Call Forward – All Call option for a mailbox profile automatically sets or cancels the

forwarding of a call.

InUCB Blade

InUCB is a Server Blade (CD-SVRU) with the UCB (Unified Communication for Business) installed with

reduced capacities and functionalities. The CD-SVRU blade can be installed in any vacant slot within the

SV8100. SV8100 Version 5000, UCB 5.1, and TSP 4.00 or higher software required.

Installation of unauthorized software on the InUCB Blade will void the warranty.

UCB 6.2 or higher is not supported on InUCB.

InUCB can be migrated to an external UCB.

Executive Conference is not supported with InUCB.

The IP address for the InUCB is provided by the OS (Embedded XP) on the Blade and

does not follow SV8100 system programming (Program 10-55-01).

Locally provided Keyboard, Monitor and Mouse will be required for initial setup of the

InUCB IP Address.

Locally provided Keyboard, Monitor and Mouse can be used for Setup and Administration

of InUCB (OS and UCB Application).

InUCB has the same Service Conditions and Restrictions as UCB on an External Server.

InUCB has reduced capacities and functionalities compared to UCB on an External Server.

Refer to tables below.

UCB (Unified Communications for Business)

UNIVERGE SV8100