NEC Univerge SV8100 Features And Specifications Manual page 1032

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Centralized E911 – K-CCIS is supported.

When Centralized E911 – K-CCIS is not used, each UNIVERGE SV8100 system in a

K-CCIS network must have at least one trunk for Emergency 911 calls.

Using a NEAX-to-UNIVERGE SV8100 network, the PBX must supply centralized voice

Multiline terminals must have an available Call Appearance (CAP) key to originate or

answer a K-CCIS trunk call.

Direct access of K-CCIS voice or data channels using Line keys or Specified Line Seizure

access codes is prohibited.

The Recall key or Drop key does not function on K-CCIS calls. When either key is pressed,

operation is ignored, and the call continues.

Trunk queuing is prohibited on a K-CCIS trunk route.

Routing an incoming DID call directly across a K-CCIS link (Direct Inward Dialing

is supported only when a Closed Numbering Plan using F-Routes is used.

This feature is not supported by the CD-4ODTA Analog Line interface.

Up to eight CD-CCTA blades can be assigned per system.

Extension numbers cannot start with 0 or 9.

Internal Calls, transferred calls, and K-CCIS calls do not provide Caller ID to single line

Caller ID Call Return feature is not supported with K-CCIS calls.

Call Park Searching is supported only in the local system.

When the system searches the Dial Extension Analyze Table (Program 11-20-01), it uses

prefix searching, giving the lower table number the higher priority. For example, the user

programs 211 in table 1 and 2113 in table 2, then dials 2113, the system selects table 1.

When using ARS Class of Service Matching, CCIS calls always follow Class of Service 1.

UCB is not supported for Centralized Voice Mail.

When using Version 4000 or lower software, InMail is not supported for centralized voice

mail in a KTS to KTS CCIS network.

When using Version 5000 or higher software, InMail is supported for centralized voice

mail in a KTS to KTS CCIS network.

With Version 3000 or higher software, the T-1 CCTA blade is supported in the primary

system and/or secondary systems of a NetLink network.

When using InMail in a CCIS or Netlink network, 8-digit extensions and mailboxes are not

UNIVERGE SV8100