Figure 2-37 Webpro End User Screen - NEC Univerge SV8100 Features And Specifications Manual

Issue 13.0
Conditions
With SV8100 Version 5000 (5.00 or higher) software and PZ-IPLB daughter board

installed, half duplex connections are not supported. For troubleshooting purposes, a
managed switch capable of port mirroring is required to capture packet data from the
SV8100 IPLB Ethernet port.
When connecting via a dial up connection, a Dial Up Connection (PPP) must be configured

in Windows Network Connections.
When uploading via a Dial Up connection, uploading card configuration (Hardware Upload)

is not supported.
The hardware/software requirements for the host PC running the PCPro application are:

CPU
Memory
Operating System (OS)
Other
Communication Port
2 - 1250

Figure 2-37 WebPro End User Screen

Item
Pentium
Pentium 4 2.5GHz (recommended)
128MB of RAM, 256MB (recommended)
Windows XP or Microsoft Vista
Windows 7 (32- and 64-bit)
Microsoft Internet Explorer 6.0 or higher
LAN, or Modem
Requirement
®
III 598MHz (minimum)
UNIVERGE SV8100
PC Programming