NEC Univerge SV8100 Features And Specifications Manual page 1255

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-10-20 Service Code Setup (for System
Administrator) – VRS - Record/
Erase Message
11-12-20 Service Code Setup (for Service
Access) – External Paging
20-07-13 Class of Service Options
(Administrator Level) – VRS
Record (VRS Msg Operation)
Operation
External VRS Messaging:
To page into an external zone with VRS message:
1. Pick up the handset or press Speaker at multiline terminal.
2. Dial 703 and then the External Paging Zone code (1-8, 0 for all call).

Paging, External (VRS)
Description/Comments
Define the service code to record
or erase a VRS message.
External paging access code.
Service code setup.
In case of normal Paging via

External speaker:
<Service code+Paging group
number (0: all, 1-8)>.
In case of VRS Paging via

External speaker:
<Service code+ +Paging
group number (0: all, 1-8)+VRS
message number (001-100).
Turn Off or On an extension user
ability to record, erase and listen
to VRS messages.
Assigned Data
1
MLT, SLT
(default = 616)
MLT, SLT
(default = 703)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
Issue 13.0
Level
2 3



2 - 1221