NEC Univerge SV8100 Features And Specifications Manual page 823

UNIVERGE SV8100
Program
Program Name
Number
84-10-01 ToS Setup – ToS Mode
84-10-07 ToS Setup – Priority (D.S.C.P. -
Differentiated Services Code
Point)
84-22-01 DT700 Multiline Logon
Information Setup – User ID
84-22-02 DT700 Multiline Logon
Information Setup – Password
84-22-03 DT700 Multiline Logon
Information Setup – User ID
Omission
84-22-04 DT700 Multiline Logon
Information Setup – Log Off
IP Multiline Station (SIP)
Description/Comments
When Input Data is set to 1,
Protocol 7 is invalid. When Data is
set to 2, Protocols 2~6 are invalid.
DSCP (Differentiated Services
Code Point).
Input the User ID for each
Personal ID Index (1-512) when
using auto or manual registration
in 10-46-01.
IP multiline terminals only

support numerical user IDs,
not alphanumeric.
Input the Password for each
Personal ID Index (1-512) when
using manual or auto registration
in 10-46-01.
Enable/Disable User ID Omission.
Used when the registration

mode (10-46-01) is set to
manual. When the phone
prompts for a login, the
previous user ID appears so
the user only has to enter the
password.
When the registration mode
(10-46-01) is set to manual, and
the phone prompts for a login, the
previous user ID appears so the
user only has to enter the
password.
When enabled, the extension
assigned to the Personal ID Index
can be logged off or overridden by
another IP multiline station or
Softphone.
In Manual mode a user can

also logoff the IP phone to
allow another user to login
with their own user ID and
password.
To logoff the IP phone:
Press the Down Arrow
Softkey, press the Prog
Softkey, and then press the
LOGOFF Softkey.
Assigned Data
1
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
(default = 0)
0~63
(default = 0)
Up to 32 characters
(default not assigned)
Up to 16 characters
(default not assigned)
0 = Off
1 = On
(default = 0)
0 = Off
1 = On
(default = 1)
Issue 13.0
Level
2 3






2 - 789