NEC Univerge SV8100 Features And Specifications Manual page 1708

Issue 13.0
Transferring Intercom Calls:
To Transfer your Intercom call:
1. At the multiline terminal, press Hold.
- OR -
At single line telephone, hookflash.
2. Dial extension to receive your call.
If the extension is busy, does not answer or does not want the call, you can dial another extension number or

press the lit line key to return to the call. In addition, you may be able to hang up and have the call Camp-On.
Single line telephone users can press hookflash to retrieve the call. If a call was transferred and the 500/2500

user has hung up the handset, the call can be retrieved by dialing
transferred.
3. Announce your call and press Transfer (Program 15-07 or SC 751: 06) or hang up.
With Automatic On-Hook Transfer

When you hang up, the call is automatically transferred.
Without Automatic On-Hook Transfer

You must press your Transfer Programmable Function Key to Transfer the call.
To Transfer the call unscreened, press your Transfer Programmable Function Key and hang up without making
an announcement.
Transferring a Call Into a Conference/Existing Call:
1. While on a call, press Transfer and dial service code 624.
The display shows the Transfer to Conf. ICM Dial.

2. Enter the extension number of the co-worker currently on a Conference call to which the call
should be transferred.
To cancel the transfer, press the flashing line key to retrieve the call.

If an error tone is heard, Barge-In is not enabled for the extension and the call does not go through . Press the

flashing line key to retrieve the call or hang up, and the call recalls the extension.
3. The transferred call is incorporated into the conference call.
The callers hear the Barge-In tone if enabled in Program 20-13-17.

If a call is transferred into a Barge-In Conference (an existing 2-party call into which an extension user has used

the Barge-In feature to join), the Conference becomes a regular 4-party Conference call.
4. Hang up.
Transferring a Call to a Trunk Ring Group:
1. While on a call, press Transfer.
2. Dial the Transfer to Ring Group service code defined in Program 11-15-09.
You hear confirmation tone.

2 - 1674
UNIVERGE SV8100
and the extension number to which it

Transfer