NEC Univerge SV8100 Features And Specifications Manual page 920

Issue 13.0
Program
Program Name
Number
84-13-49 SIP Trunk CODEC Information
Basic Setup – RTP Filter
84-13-50 SIP Trunk CODEC Information
Basic Setup – FAX Relay Mode
84-13-51 SIP Trunk CODEC Information
Basic Setup – T.38 Protocol
Mode
84-13-52 SIP Trunk CODEC Information
Basic Setup – FAX Maximum
Rate
84-13-54 SIP Trunk CODEC Information
Basic Setup – FAX Packet Size
84-13-55 SIP Trunk CODEC Information
Basic Setup – High Speed Data
Packet Length
84-13-56 SIP Trunk CODEC Information
Basic Setup – Low Speed
Redundancy
84-13-57 SIP Trunk CODEC Information
Basic Setup – High Speed Data
Packet Redundancy
84-13-58 SIP Trunk CODEC Information
Basic Setup – TCF Handling
Method
84-13-59 SIP Trunk CODEC Information
Basic Setup – Maximum Low
Speed Data Packetization
84-13-60 SIP Trunk CODEC Information
Basic Setup – Transmit Network
Timeout
2 - 886
Description/Comments
To avoid incorrect voice pass
connection, this program checks
the sending side address from
received RTP packet at VoIPDB.
Enables/Disables the FAX relay
mode.
Sets the T.38 protocol mode.
Sets the maximum FAX rate.
Sets the FAX packet size.
Sets the high speed data packet
length (v27ter, V29, V33, and
V17).
Sets the number of redundant
packets for V.21.
Sets the number of redundant
packets for V.27ter, V.29, V33 and
V17.
Sets the training confirmation
handling mode. Local denotes
that the VoIP generates and
checks, Network denotes that the
TCF is sent to the network
provider.
Sets the maximum number of
bytes of low-speed fax data packet
into each network packet.
Sets the timer value of transmits
network timeout.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Enable
(default = 0)
0 = Disable

1 = Enable
(default = 0)
0 = RTP

1 = UDPTL
(default = 1)
0 = V.27ter, 2400bps
1 = V.27ter, 4800bps
2 = V.29, 7200bps
3 = V.29, 9600bps
4 = V.17, 12000bps
5 = V.17, 14400bps
(default = 5)
20~48 (bytes)
(default = 20)
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(default = 4)
0~5
(default = 0)
0~2
(default = 0)
0 = Receive TCF signal
by VoIPDB
1 = Through TCF
signal to external FAX
(default = 1)
1~65535 (bytes)
(default = 1)
10~32000 seconds
(default = 150)
Level
2 3








