Table 2-118 Sv8100 Configuration - NEC Univerge SV8100 Features And Specifications Manual

Issue 13.0
SV8100 Configuration Change
New Station Card Added
New Trunk Card Added
New IP Trunks (SIP, H.323, K-CCIS added)
New IP Phone Registered
Extension Number Changed
Station Card Removed (Program 90-05-01)
Trunk Card Removed (Program 90-05-01)
IP Trunks (SIP, H.323, K-CCIS) Removed
(Programs 10-40-01, 10-40-02, 10-40-04)
IP Phone Unregistered (Program 90-23-01)
Function Keys Changed (Note 3)
Note 1: TSP needs to be reset when adding/changing an application key or virtuals.
Note 2: CAP, ICM, Headset, etc. do not require a reset of the TSP.
Note 3: Change of Function Keys using Webpro, PCPro and Handset Programming and Access Codes.
Restrictions
UCB is not supported for Centralized Voice Mail.

Prior to resetting (powering off and on), the system for any reason, stop the UCB. Restart

UCB after the system comes back up.
Two SIP extensions are needed for each Aculab SIP port SV8100 Version 4000 (4.01),

UCB 5.0 SP4 and TSP 3.03 or lower software.
Each queue requires a SIP extension.

SIP extension is needed for each Aculab SIP port. SV8100 Version 5000, UCB 5.1,
 One
and TSP 4.00 or higher software required.
Call Pick Up is not supported for ringing Queue calls at agent's station.

DNIS display is not supported for incoming calls to the UCB.

When using Netlink and UCB, the trunks and extensions on the remote sites are not

supported for UCB with Version 2500 (2.50 or lower).
When using Netlink and UCB, the trunks and extensions on the remote sites are supported

for UCB with Version 2500 (2.51 or higher).
2 - 1698

Table 2-118 SV8100 Configuration

UCB TSP Reset
Required
X
X
X
X
X
X
X (Note 1)
PC Reset Required
X
X
X
UCB (Unified Communications for Business)
UNIVERGE SV8100
No Reset Required
X (Note 2)