NEC Univerge SV8100 Features And Specifications Manual page 910

Issue 13.0
Program
Program Name
Number
10-19-01 VoIP DSP Resource Selection
10-23-01 SIP System Interconnection
Setup – System Interconnection
10-23-02 SIP System Interconnection
Setup – IP Address
10-23-04 SIP System Interconnection
Setup – Dial Number
10-28-01 SIP System Information Setup –
Domain Name
10-28-02 SIP System Information Setup –
Host Name
10-28-03 SIP System Information Setup –
Transport Protocol
10-28-04 SIP System Information Setup –
User ID
2 - 876
Description/Comments
Select type of IPLA/IPLB DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
Determine if the system is
interconnected to another system.
Define the IP Address of the SIP
System Interconnection.
Define Dial Number for the SIP
System Interconnection.
Define the Domain name. This
information is generally provided
by the SIP carrier.
Define the Domain name. This
information is generally provided
by the SIP carrier.
Define the Transport type. This
option is always set to UDP.
Define the User ID.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
1
0 = Common use for
both IP extensions and
trunks
1 = IP Extension
2 = SIP Trunk

3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
0 = No (Disable)

1 = Yes (Enable)
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
Up to 12 digits (0~9)

(default not assigned)
Up to 64 Characters

(default not assigned)
Up to 48 Characters

(default not assigned)
0 = UDP

1 = TCP
(default = 0)
Up to 32 Characters
When assigning the
User ID, the ID may
contain only alpha
characters. (A space

and/or special
characters are not
allowed in the User ID
field).
(default not assigned)
Level
2 3