NEC Univerge SV8100 Features And Specifications Manual page 1274

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Except for dialing the PBX access code, users place calls on PBX trunks just like other

trunks. All relevant access programming applies. Refer to the

on page 2-277

You can have DILs route from the connected PBX. Users can access these trunks for

outgoing PBX calls. All PBX Compatibility restrictions and programming apply.

Flash may allow access to certain PBX features – like Transfer. Make sure you program

Flash for compatibility with the connected PBX.

The system does not provide automatic Pulse to Tone Conversion after outdialing the PBX

trunk access code.

You can program incoming DISA trunks to be outgoing PBX trunks. All PBX Compatibility

restrictions and programming apply.

PBX trunks can follow normal system Toll Restriction.

Users can get outbound access to PBX trunks through Trunk Groups and/or Trunk Group

Routing. All PBX Compatibility restrictions and programming apply.

If the system routes a call to a PBX trunk, it does not automatically insert the PBX access

code. It outdials the call just as the user dialed it.

Default Setting

System Availability

All Terminals

Required Component(s)

Related Features

Account Code Entry

Call Forwarding – Centrex

feature for more details.

UNIVERGE SV8100

Central Office Calls, Placing

PBX Compatibility