NEC Univerge SV8100 Features And Specifications Manual page 1177

UNIVERGE SV8100
Program
Program Name
Number
34-04-01 E&M Tie Line Toll Restriction
Class
34-05-01 Tie Line Outgoing Call
Restriction
34-06-01 Add/Delete Digit for E&M Tie
Line – Delete Digit
34-06-02 Add/Delete Digit for E&M Tie
Line – Additional Dial Digits
34-07-01 E&M Tie Line Timer – First Digit
Pause (E&M Immediate Start)
34-07-02 E&M Tie Line Timer – First Digit
Pause (E&M Wink Start)
34-07-03 E&M Tie Line Timer – First Digit
Pause (LD Trunk)
34-07-04 E&M Tie Line Timer – LD Trunk
Guard Time
34-07-05 E&M Tie Line Timer – Trunk
Answer Detect Timer for E&M
34-08-01 Toll Restriction Data for E&M Tie
Lines
Multiple Trunk Types
Description/Comments
If the system uses Toll Restriction,
enter a Toll Restriction Class
(1~15) for each Tie Line. The
system uses the class you enter in
Program 21-05 and 21-06. Make
a separate Toll Restriction Class
entry for each night service mode.
You cannot use Program 20-06 to
assign Toll Restriction to Tie
Lines.
Build a restriction matrix for
outgoing trunk calls placed over a
Tie Line. For each Tie Line trunk
group, Enable/ Disable outgoing
access to each CO trunk group.
Some Tie Line networks pass the
location number and extension
number to the remote side. If the
system should ignore these digits,
use this program to define the
number of digits which should be
deleted for a call.
If a Tie Line network requires
additional digits to reroute the call
to a location, enter the digits for
the location which should be
added to the received digits.
Define the First Digit Pause (E&M
Immediate Start) timer.
Define the First Digit Pause (E&M
Wink Start) timer.
Define the First Digit Pause (LD
Trunk) timer.
Define the LD Trunk Guard Time.
Define the Trunk Answer Detect
Timer for E&M timer.
Define the toll restriction data for
E&M Tie Lines if required. This
must be defined if toll restriction is
enabled in Program 21-05-13.
Assigned Data
1
1~15
(default = 2)
0 = Enable
(Y-Tandem)

1 = Disable
(N-Tandem)
(default = 0)
0~255
(255 = delete all digits)
(default = 0)
Up to four digits
#
0~9, ,
(default not assigned)
0~64800 (seconds)
(default = 3)
0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 3)
0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 30)
Up to 10 digits
#
(0~9, , )
(default not assigned)
Issue 13.0
Level
2 3









2 - 1143