NEC Univerge SV8100 Features And Specifications Manual page 1688

Issue 13.0
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TCP Port
Operation
TAPI operation is automatic once programmed in the telephone system and enabled in the PC TAPI
application, unless a headset is used.
Using the Headset with Automatic Answer:
1. With the multiline terminal in an idle state, press the Help key.
2. Press the Headset key (Program 15-07 or SC 751: 05) twice.
3. Press the Exit key to return the display to idle.
The Headset key blinks when Automatic Headset is activated.

To cancel Automatic Headset, repeat these steps.

To redirect calls to the headset and disable the hookswitch (required for some TAPI features):
1. With the multiline terminal in an idle state, press the Help key.
2. Press the Headset key (Program 15-07 or SC 751: 05) twice.
3. Press the Exit key to return the display to idle.
The Headset key blinks when Automatic Headset is activated.

To cancel Automatic Headset, repeat these steps.

4. Press the Headset key (Program 15-07 or SC 751: 05) to go off-hook.
2 - 1654
Description/Comments
Define the TCP port/address/etc.
for communicating to external
equipment.
UNIVERGE SV8100
Assigned Data
1
0~65535
default:
External Device 1 (CTI)
= 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM

Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
TAPI Compatibility
Level
2 3