NEC Univerge SV8100 Features And Specifications Manual page 778

Issue 13.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
 The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TCP Port
11-10-16 Service Code Setup (for System
Administrator) – Leaving
Message Waiting (Requires CPU
to be licensed for Hotel/Motel)
11-14-01 Service Code Setup (for Hotel) –
Set DND for Own Extension
11-14-02 Service Code Setup (for Hotel) –
Cancel DND for Own Extension
2 - 744
Description/Comments
Define the TCP port (0~65535)
when communicating to the SMDR
(type 5).
Customize the leave message
waiting Service Codes for the
System Administrator
(CD-CP00-US must be licensed
for Hotel/Motel).
Customize the set DND for own
extension used with the Hotel/
Motel feature (CD-CP00-US must
be licensed for Hotel/Motel).
Customize the cancel DND for
own extension used with the
Hotel/Motel feature (CD-CP00-US
must be licensed for Hotel/Motel).
UNIVERGE SV8100
Assigned Data
1
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
MLT
(default = 626)
MLT, SLT
(default = 627)
MLT, SLT
(default = 628)
Hotel/Motel
Level
2 3



