NEC Univerge SV8100 Features And Specifications Manual page 1100

Issue 13.0
To answer a Message Waiting:
 When you have a message, your Message Waiting LED flashes fast for multiline terminals.
1. At the multiline terminal, press Speaker and dial
- OR -
Press the Message Waiting key (Program 15-07 or SC 751: 38).
- OR -
At the single line telephone, lift the handset and dial
If the called extension does not answer, dial 0 or press your Message Waiting key to automatically leave them a

message.
Normally, your Message Waiting LED goes out. If it continues to flash, you have new messages in your Voice

Mail mailbox or a new General Message. See "To check your messages" below.
To cancel all your Messages Waiting:
 This includes messages you have left for other extensions and messages other extension have left for you.
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 773.
3. Hang up.
To cancel the Messages Waiting you have left at a specific extension:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 771.
3. Dial the number of the extension you do not want to have your messages.
4. Hang up.
2 - 1066
0.

0.

UNIVERGE SV8100
Message Waiting