NEC Univerge SV8100 Features And Specifications Manual page 802

Issue 13.0
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
20-11-07 Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
20-13-22 Class of Service Options
(Supplementary Service) – Busy
Status Display (Called Party
Status)
20-17-01 Operator Extension – Operator's
Extension Number
20-18-01 Service Tone Timers – Extension
Dial Tone Time
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit Time
82-01-01 Incoming Ring Tone – Frequency
(01) 1
82-01-02 Incoming Ring Tone – Frequency
2
2 - 768
Description/Comments
Assign Class of Service (1~15) for
extensions.
Turn Off or On Intercom calling for
the extension.
When an extension is set to ring
mode for ICM calls, enable this
option to prevent callers from
changing the call to voice
announce mode.
Turn Off or On an extension user
ability to use Transfer Without
Holding.
Turn Off or On an extension user
ability to display the detailed state
of the called party.
Define the extension numbers
used by operators.
After getting Intercom dial tone, a
multiline terminal user has this
time to dial the first digit of the
Intercom call.
When placing Intercom calls, an
extension user must dial each digit
during this time.
Customize the Intercom ring tone.
Customize the Intercom ring tone.
UNIVERGE SV8100
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Up to eight digits
(default = 101)
0~64800 (seconds)
(default = 30)
0~64800 (seconds)
(default = 10)
1 = 520Hz
2 = 540Hz
3 = 660Hz
4 = 760Hz
5 = 1100Hz
6 = 1400Hz
7 = 2000Hz
Default:
Refer to Table 2-40
Default Incoming
Ringing Tone on page
2-770.
Level
2 3









Intercom