Table of Contents
Advertisement
2) Press-fit bushing so that dimensions "A" and "B" in
figure become equal.
Control Rod Check
• Inspect for cracks, deformation or damage.
• Inspect bushing for wear and breakage.
If any faulty condition is found, replace.
Trailing Rod Removal and Installation
Removal
1) Hoist vehicle and remove rear wheels.
2) Support lower arm with jack.
3) Remove air suction pipe bolts (1) for 5door model
only.
1
4) Remove trailing rod front bolt (1) and trailing rod rear
bolt (2) and then trailing rod (3).
I5JB0A230024-01
5) Remove trailing rod mount bracket bolt (1) and then
trailing rod mount bracket (2).
S6JB0A2306010
Installation
1) Install trailing rod mount bracket and then tighten
trailing rod mount bracket bolt to specified torque.
I5JB0A230025-01
CAUTION
!
• Tighten the bolts in order of bolt (1), (2)
S6JB0A2306011
and (3).
• Do not reuse removed trailing rod mount
bracket bolt.
Tightening torque
Trailing rod mount bracket bolt (a): 105 N·m (
10.5 kgf-m, 76.0 lb-ft)
1
I5JB0A230026-01
Rear Suspension:
3
2
2
1
1,(a)
I: Vehicle inner side
2C-12
1
I5JB0A230027-01
1
I5JB0A230028-02
2,(a)
3,(a)
I6JB0A230004-02
Advertisement
Chapters
Table of Contents
