Sun Oracle SPARC T3-2 Service Manual page 97

Caution – The latch is not an ejector. Do not bend it too far to the right. Doing so can
damage the latch.
a. Push the release button to open the latch and unlock the drive filler panel by
moving the latch to the right.
b. Grasp the latch and pull the filler panel out of the drive slot.
Caution – When you remove a hard drive filler panel, replace it with another filler
panel or an HDD; otherwise, the server might overheat due to improper airflow.
Related Information
"Locate a Faulty Hard Disk Drive" on page 83
■
"Remove a Hard Disk Drive" on page 86
■
"Install a Hard Disk Drive" on page 88
■
"Install a Hard Disk Drive Filler Panel" on page 90
■
"Verify Hard Disk Drive Functionality" on page 91
■
Servicing Hard Disk Drives 85