Install The System Battery - Sun Oracle SPARC T3-2 Service Manual

▼ Install the System Battery

1. Attach an antistatic wrist wrap and unpack the replacement battery.
2. Press the new battery into the battery holder with the positive side (+) facing
away from the metal tab that holds it in place.
3. If the service processor is configured to synchronize with a network time server
using the Network Time Protocol (NTP), the ILOM clock will be reset as soon as
the server is powered on and connected to the network. Otherwise, proceed to
the next step.
4. If the service processor is not configured to use NTP, you must reset the ILOM
clock using the ILOM CLI or the web interface. For instructions, see the Oracle
Integrated Lights Out Manager (ILOM) 3.0 Documentation Collection.
5. Return the server to operation:
a. Return the server to the normal rack position.
b. Reinstall the power cords to the power supplies and power on the server.
Related Information
"Remove the System Battery" on page 144
■
146 SPARC T3-2 Server Service Manual • December 2013
See "Return the Server to the Normal Rack Position" on page
See "Returning the Server to Operation" on page
197.
195.