Install A Hard Disk Drive Filler Panel - Sun Oracle SPARC T3-2 Service Manual

▼ Install a Hard Disk Drive Filler Panel

1. Verify that the release lever on the disk drive filler panel is fully opened.
2. Install the drive by completing the following tasks.
a. Slide the drive filler panel into the drive slot until it is fully seated.
b. Close the latch to lock the filler panel in place.
Related Information
"Locate a Faulty Hard Disk Drive" on page 83
■
"Remove a Hard Disk Drive" on page 86
■
"Install a Hard Disk Drive" on page 88
■
"Remove a Hard Disk Drive Filler Panel" on page 84
■
"Verify Hard Disk Drive Functionality" on page 91
■
90 SPARC T3-2 Server Service Manual • December 2013