Display Fru Information With The Show Command - Sun Oracle SPARC T3-2 Service Manual

▼ Display FRU Information With the show
Command
Use the ILOM show command to display information about individual FRUs.
●
At the -> prompt, enter the show command.
In the following example, the show command displays information about a
DIMM.
-> show /SYS/MB/CMP0/MRO/B0B0/CH0/D0
/SYS/MB/CMP0/MRO/B0B0/CH0/D0
Targets:
T_AMB
SERVICE
Properties:
Type = DIMM
ipmi_name = PO/MO/B0/C0/D0
component_state = Enabled
fru_name = 2048MB DDR3 SDRAM
fru_description = DDR3 DIMM 2048 Mbytes
fru_manufacturer = Samsung
fru_version = 0
fru_part_number = ****************
fru_serial_number = ******************
fault_state = OK
clear_fault_action = (none)
Commands:
cd
set
show
Related Information
"Diagnostics Process" on page 16
■
"Clear Faults With the clear_fault_action Property" on page 30
■
Detecting and Managing Faults 27