Show Faulty Example Of A Post-Detected Fault; Show Faulty Example Of A Psh-Detected Fault - Sun Oracle SPARC T3-2 Service Manual

show faulty Example of a POST-Detected Fault

The following is an example of the show faulty command displaying a fault that
was detected by POST. These kinds of faults are identified by the message Forced
fail reason, where reason is the name of the power-on routine that detected the fault.
-> show faulty
Target
-------------------+------------------------+--------------------------------
/SP/faultmgmt/0
/SP/faultmgmt/0
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0

show faulty Example of a PSH-Detected Fault

The following is an example of the show faulty command displaying a fault that
was detected by the PSH technology. These kinds of faults are identified by the
absence of the characters "SPT" at the beginning of the message ID.
-> show faulty
Target
--------------------+------------------------+--------------------------------
/SP/faultmgmt/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
34 SPARC T3-2 Server Service Manual • December 2013
| Property
| fru
| class
|
| sunw-msg-id
|
| uuid
|
| timestamp
|
| detector
|
| fru_part_number
|
| fru_serial_number
|
| product_serial_number
|
| chassis_serial_number
|
| Property
| fru
| class
|
| sunw-msg-id
|
| uuid
|
| timestamp
| Value
| /SYS/MB
| fault.component.disabled
|
| SPT-8000-HR
|
| ********************************
| a262
| 2010-09-03/11:21:17
|
| /SYS/MB/CMP0/NIU1
|
| 541-3857-04
|
| ******************
|
| **********
|
| **********
|
| Value
| /SYS/MB
| fault.cpu.generic-sparc.strand
|
| SUN4V-8002-6E
|
| ********-****-****-****-************
| 7a8a
| 2010-08-13/15:48:33