Power Off The Server (Power Button - Standby Mode) - Sun Oracle SPARC T3-2 Service Manual

Hide thumbs Also See for SPARC T3-2:
Table of Contents

Advertisement

4. Shut down all logical domains.
Refer to Solaris system administration documentation for additional information.
5. Shut down the Solaris OS.
Refer to the Solaris system administration documentation for additional
information.
6. Switch from the system console to the -> prompt by typing the #. (Hash
Period) key sequence.
7. At the -> prompt, type the stop /SYS command.
Note – You can also use the Power button on the front of the server to initiate a
graceful server shutdown. (See
Mode)" on page
Use the tip of a pen to operate this button.
Related Information
"Power Off the Server (Power Button - Standby Mode)" on page 70
"Power Off the Server (Emergency Shutdown)" on page 71
"Front Components" on page 1
▼ Power Off the Server (Power Button - Standby
Mode)
This procedure places the server in the power standby mode. In this mode, the
Power OK LED blinks rapidly.
Press and release the recessed Power button.
You may need to use a pointed object, such as a pen or pencil.
Related Information
"Power Off the Server (Service Processor Command)" on page 69
"Power Off the Server (Emergency Shutdown)" on page 71
"Front Components" on page 1
70
SPARC T3-2 Server Service Manual • December 2013
"Power Off the Server (Power Button - Standby
70.) This button is recessed to prevent accidental server power-off.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPARC T3-2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents