Advertisement
Quick Links
Netra SPARC T3-1B Server Module
Getting Started Guide
This guide describes the minimum steps required to install and power on Oracle's Netra SPARC T3-1B server
module for the first time.
For more detailed installation information, refer to the online Netra SPARC T3-1B Server Module Installation Guide
and the installation guide for your Sun Netra 6000 modular system. Also read the latest Netra SPARC T3-1B
Server Module Product Notes to find out if any late-breaking issues impact installation requirements:
http://www.oracle.com/pls/topic/lookup?ctx=E21652-01&id=homepage
Shipping Kit Contents
▼ Install Optional Components
♦
Before installing the server module into the modular system chassis, install any optional components that
you ordered for the server module.
Optional components might already be installed in the server module you received. See the customer
information sheet for details. For instructions on installing optional components, refer to the documentation
for each component and the Netra SPARC T3-1B Server Module Service Manual.
Figure Legend
1
Printed documentation
2
Server module
3
Shipping carton
4
Customer information sheet (save this for MAC
addresses and other information)
1
Advertisement
Related Manuals for Sun Oracle Netra SPARC T3-1B
Summary of Contents for Sun Oracle Netra SPARC T3-1B
-
Page 1: Getting Started Guide
For more detailed installation information, refer to the online Netra SPARC T3-1B Server Module Installation Guide and the installation guide for your Sun Netra 6000 modular system. Also read the latest Netra SPARC T3-1B Server Module Product Notes to find out if any late-breaking issues impact installation requirements: http://www.oracle.com/pls/topic/lookup?ctx=E21652-01&id=homepage... -
Page 2: Install The Server Module Into The Chassis
▼ Install the Server Module Into the Chassis The server module is hot-pluggable in the chassis. The instructions in this guide assume that the Sun Blade 6000 modular system is installed, and is up and running. 1. Remove the filler panel from the desired server module slot in the chassis. Be ready to insert the server module or a filler panel in the empty slot within 60 seconds. -
Page 3: Determine Your Connection Method
Connect to the server module using one of the methods shown in the following figure and table. This guide uses method 1, but you can use the other methods as described in the Netra SPARC T3-1B Server Module Installation Guide. -
Page 4: Access Oracle Ilom On The Server Module Sp (Web Interface)
For details on the Oracle Solaris OS configuration process, see the Netra SPARC T3-1B Installation Guide and the installation guides for your version of Oracle Solaris OS. -
Page 5: Check For The Latest Os, Patches, And Firmware
The server module hardware installation is complete and the server module is ready to be configured to suit your needs. For details on the Oracle Solaris OS configuration process, see the Netra SPARC T3-1B Server Module Installation Guide and the installation guides for your version of Oracle Solaris OS. -
Page 6: Accessing Additional Information
Accessing Additional Information Find the documentation for Oracle’s Netra SPARC T3-1B server module at: http://www.oracle.com/pls/topic/lookup?ctx=E21652-01&id=homepage Task Document Title or URL Review known issues, workarounds, and Netra SPARC T3-1B Server Module Product Notes new information. Connect to server module for initial Netra SPARC T3-1B Server Module Installation Guide installation and configuration.